Site Soil Evaluations

Before You Build: The Importance of a Site & Soil Evaluation

Whether you’re a commercial developer looking to expand your business or an individual hoping to build your dream house, one thing is certain: you’re going to need a site & soil evaluation before you build.

While most people have heard of site & soil evaluations, many don’t know what they are or why they’re important. To help you understand the importance of this vital step, we’re going to walk you through the nitty gritty of this key environmental service.

What is a Site & Soil Evaluation?

The quality of soil on a given site can vary greatly, and these variations will affect how the site can be used and what amendments, if any, must be made. A site & soil Evaluation is one of the first steps toward obtaining any permits, which is why they so important at the beginning of a project.

What Do Site & Soil Evaluations Review?

There are seven site and soil properties we evaluate before any project can begin. These properties are:

  • Soil texture (the amount of sand silt and clay in the soil)
  • Permeability (the rate at which water enters and passes through the soil)
  • Depth of soil to bedrock
  • Slope (the steepness and length of the slope specifically)
  • Shrink-swell of the soil (this involves changes in volume based on the wetness of soil)
  • Water table (the depth at which water occurs in the soil both seasonally and permanently)
  • Flood hazards (the frequency that the site is inundated by flooding)

If you are interested in evaluation of the following two site and soil properties, please contact Applied Resource Management for further information:

  • Erosion hazard (the amount of topsoil currently on the site, and the potential for future loss)
  • Surface runoff (the rate at which water flows off the site, based on slope, permeability, and texture)

Each of these properties will have a huge impact on your project, and knowing where you stand on these issues can help you plan and budget accordingly.

What is the Process Like?

At Applied Resource Management, we begin site & soil evaluations by conducting a preliminary review to determine options and potentially followed by a soils mapping valuation of the entire subject property, leaving no stone unturned. This includes initial soils evaluations, mapping and design recommendations for wastewater disposal areas, and soils maps sealed by a North Carolina Licensed Soil Scientist. An anticipated but approximate long term acceptance rate (LTAR) in gallons per day for drip field design and coordination with design/planning team for maximizing site development is included. For some properties, a lot layout evaluation is an option. The time it takes to complete the evaluation depends on the depth, location, and availability of an approvable soil formation.

How Can ARM Help?

Applied Resource Management’s Soils Division at Applied Resource Management is staffed with highly experienced and well-trained individuals, who focus on facilitating residential and commercial property transfers and transactions. Working with our soil scientists is a crucial step that will give you an accurate understanding of your property and any issues it may have, expert advice on regulatory requirements, a detailed view of the project impacts, and required documentation for and help securing necessary permits.

If you’re about to embark on a development project, your first step should be to contact Applied Resource Management. We’ll make sure you get off on the right foot and that your project is successful from beginning to end.

Ways to lower your air conditioning bill

5 Ways to Lower Your AC Bill This Summer

The temperatures are rising, the days are getting longer, and off in the distance we can hear the sweet siren of the ice cream truck. This can only mean one thing—summer is officially here! As we all know, summers in North Carolina are hot and humid, which means air conditioning is pretty much a necessity. While cranking up the AC and enjoying the cool air is lovely, it can also put a strain on your wallet. This is a shame, mostly because it means there’s less cash for beach trips and new bathing suits! Lucky for you, we’ve put together a list of ways to keep your energy costs down this summer. Give them a try and reap the rewards!

1. Turn up your thermostat when you’re away.

Some people believe that it uses less energy to maintain the same temperature constantly, but this myth has been debunked! For the most savings, keep your home a few degrees warmer when you’re at work, and then turn it down to a cool 78F when you get home.

2. Use ceiling fans to keep the room cool.

Turning on the ceiling fan will allow you to raise the thermostat about 4F without feeling any change in temperature. But remember to turn off the fan when you leave the room—while fans will keep a person cool by creating a wind chill affect, they don’t actually lower the temperature in the room. Keeping them on when no one is using them is a waste of energy!

3. Embrace your outdoor grill.

Summer is ideal barbeque weather, and it’s not just because of the hot dogs and hamburgers. Grilling outside means you can avoid turning on your oven or raising the temperature with a hot stovetop. If the weather isn’t cooperating, opt for fresh salads and sandwiches, or let your microwave do the heavy lifting.

4. Cover your windows.

We love a sunny day as much as the next person, but if you want to keep your home cool, it helps to keep the sun out. For a quick fix, close your curtains, blinds, and shades. If you want to take window coverings to the next level, invest in solar screens or window films. These products can keep up to 70% of solar energy out of your home and will pay for themselves by the time fall rolls around.

5. Install a geothermal cooling system.

Geothermal energy is an effective way to cut down on energy costs, especially in the summer—you could save between 30% and 70%! While installing a geothermal system might seem like a lot of work, the long-term benefits are worth it. Homes with geothermal energy systems are also eligible for certain tax breaks, which means you could be enjoying a 30% tax credit next spring. If you’re interested in exploring geothermal energy as a way to lower your air conditioning bill, contact Applied Resource Management today and learn more about our full range of geothermal well drilling and loop system installation services.

We hope this post has given you some cool ideas for keeping costs down this summer. For more tips on saving energy and living a green life, like us on Facebook. In the meantime, have a great summer!